The SupTronics X15-F1 is an active cooling module designed for X15xxseries Compute Module 5 I/O boards (see X1500 and X1501 in the store), and fits inside the dedicated X15-C1 enclosure. It uses an 80x80mm PWMcontrolled fan to deliver significantly higher airflow than typical Raspberry Pi case fans, making it suitable for sustained high-load operation where thermal stability matters.
The fan provides up to 19.68CFM of airflow, with realtime speed control via PWM for responsive thermal management. A dedicated mounting bracket allows the fan to sit cleanly above the I/O board without interfering with existing CM5 heatsinks or coolers. Power is supplied directly from the carrier board via a fourpin fan header.
The X15-F1 is built for continuous operation, with stable performance under full load and vibrationresistant mounting.
The fan operates from a 5V supply, draws around 0.16A, and runs at up to 2500RPM with a noise level of 26.3dBA. The slim 10mm profile keeps the overall footprint compact while still delivering a substantial increase in cooling performance.
Note: Installation does come with a few trade-offs:
-
- The 40pin GPIO header is not accessible once fitted
- Fitting an external WiFi antenna in the case becomes difficult
- The fan is not compatible with the X15C2 case
IO board, CM5 and case not included.
Features
- Compact size: 808010mm cooling module with 70mm cable
- Adjustable cooling: PWM-controlled fan with real-time speed control
- High airflow: Delivers up to 19.68 CFM
- Low noise: Rated at 26.3 dBA during operation
- Stable under load: Industrial-grade reliability with vibration-resistant mount
- Low power draw: Consumes 0.8W (rated at 5V DC, 0.16A)
- Easy to mount: Supplied bracket for secure installation above compatible I/O boards
- Compatible with: X15xx-series CM5 I/O boards
Specification
- Operating voltage: 5V DC (4.5 5.5V), supplied via four-pin fan header on a carrier board
- Start voltage: 3.5V
- Power consumption: 0.8W
- Rated current: 0.16 0.02A
- Fan speed control: Pulse width modulation control with tachometer
- Maximum fan speed: 2500 RPM 10%
- Maximum airflow: 19.68 CFM
- Noise: 26.3 dBA
- Dimensions: 808010mm (LWH)
- Cable length: 70mm
- Pinout (4-pin 1.0mm pitch white connector):
- 1. Yellow (FG)
- 2. Black ()
- 3. Blue (PWM)
- 4. Red (+)
Resources
- Software setup/tutorials
- Hardware information and assembly
Package Contents
- 1x SupTronics X15-F1 Active Cooling Module for X15xx IO Boards
- Includes 80mm fan and PCB bracket
- 1x Screw/Standoff pack
IO board, CM5 and case not included.